项目ITEM | 详细内容Details | 12V180A |
充电过压保护 Charging overvoltage protection | 单串过充电检测电压 Single series overcharge detection voltage | >3.70±0.05V |
整组过充电检测电压 Over charging detection voltage of the module | >14.8±0.20V | |
过充电检测延迟时间 Overcharge detection delay time | 2.0±0.5S | |
过充电解除条件 Overcharge release conditions | 1.单串电压<=3.40±0.05V或 2.放电电流>1A Single series voltage < = 3.40 ± 0.05v or Discharge current > 1A | |
充电过流保护 Charging over current protection | 充电过流2检测电流 Charge over current 2 detection current | 充电电流>190±3A Charging current > 190 ± 3A |
充电过流2延时 Charge over current 2 delay | 10±2.0S | |
充电过流1检测电流 Charge over current 1 detection current | 充电电流>200±3A Charging current > 200 ± 3A | |
充电过流1延时 Charge over current 1 delay | 2±1.0S | |
充电过流解除条件 Discharge condition of charging over current | 1.保护后45±2.0S自动解除或 2.放电电流>1A 1. Automatic release after 45 ± 2.0S protection or 2. Discharge current > 1a | |
放电欠压保护 Discharge under voltage protection | 单串过放电检测电压 Single series over discharge detection voltage | <2.5±0.10V |
整组过放电检测电压 Over discharge detection voltage of the module | <10.8±0.30V | |
过放电检测延迟时间 Delay time of over discharge detection | 2.0±0.5S | |
过放电解除条件 Over discharge release condition | 1.单串电压高于3.10±0.050V或 2.充电电流>1A The single series voltage is higher than 3.10 ± 0.050v or Charging current > 1a | |
放电过流保护 Discharge over current protection | 放电过流2检测电流 Discharge overcurrent 2 detection current | 放电电流>190±3A Discharge current > 190 ± 3A |
放电过流2延时 Discharge over current 2 delay | 8±1.0S | |
放电过流1检测电流 Discharge overcurrent 1 detection current | 放电电流>200.0±2.5A Discharge current > 200.0 ± 2.5A | |
放电过流1延时 Discharge over current 1 delay | 2±1.0S | |
放电过流解除条件 Discharge over current release condition | 1.保护后60±2.0S自动解除或 2.充电电流>3A After 60 ± 2.0S protection, it will be automatically released or Charging current > 3a | |
温度保护 Temperature protection | 充电电池温度保护 Temperature protection of rechargeable battery | >65±2℃ or <-5±2℃ |
充电电池温度保护解除 Temperature protection of rechargeable battery removed | <60±2℃ and >0±2℃ | |
放电电池温度保护 Temperature protection of discharge battery | >65±2℃ or <-25±2℃ | |
放电电池温度保护解除 Discharge battery temperature protection removed | <60±2℃ and >-15±2℃ | |
保护板温度检测 Protection plate temperature detection | >95±2℃ | |
保护板温度保护解除 The temperature protection of the protection plate is removed | <75±2℃ | |
温度检测延时 Temperature detection delay | 2.0±0.5S | |
均衡功能 Balance function | 均衡启动电压 Equalizing starting voltage | 3.50±0.050V |
均衡电流(3.5V时) Equalizing current (at 3.5V) | 150±20mA | |
短路保护 Short circuit protection | 保护条件Protection conditions | 负载短路Load short circuit |
保护延时Protection delay | 无延时 No delay | |
保护解除条件 Conditions for release of protection | 手动复位Manual reset | |
功耗电流 Power consumption current | 静态耗电电流 Static current consumption | <500uA |